TM-9-2320-386-24-1-2
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 2 OF 2
MAY 2001
TM-9-2320-386-24-1-2 - Page 105 of 636
45.
Disconnect tubes (5) and (2) from connector (4) and elbow (3).
46.
Remove three screws (6), clamps (7), personnel heater tube (5), and heater hose (8) from engine (1).
47.
Remove screw (15), washer (14), and mounting bracket (16) from water regulator housing (9).
48.
Loosen clamp (11) on water regulator housing (9) and hose (12).
49.
Remove two screws (13), water regulator housing (9), and gasket (10) from hose (11) and engine (1).
Discard gasket (10).
50.
Remove two nuts (18), screw (22), clamp (19), clamp (23), flexpipe (17), and two gaskets (21) from
turbocharger (20) and elbow pipe (24).
Discard gaskets (21).
51.
Disconnect oil inlet tube (26) from elbow (28).
52.
Remove two screws (25), washers (33), oil inlet tube (26), gasket (32), and O-ring (27) from turbo-
charger (20) and elbow (28). Discard gasket (32) and O-ring (27).
53.
Remove elbow (28) and O-ring (29) from adapter (30) on oil cooler (31). Discard O-ring (29).
6
6
8
5
1
2
3
4
1
9
16
14
15
13
11
10
12
25
33
26
27
28
29
30
31
~
20
7
7
24
21
17
18
19
20
21
22
23
18
32
TM 9-2320-386-24-1-2
0302 00
CYLINDER HEAD (IN-VEHICLE) MAINTENANCE (Contd)
0302 00-12
Back to Top
