TM 9-2320-387-l 0
1 3-l 8. ENGINE OIL SERVlClNd
a. Raise and secure hood (para. 3-9).
CAUTION
Do not permit dirt, dust, or grit to enter engine oil dipstick tube.
Internal engine damage may result if engine oil becomes
contaminated.
NOTE
Engine oil level is checked with engine off.
If oil level checks above FULL, it may be due to oil cooler drain-
back. Operate engine for one minute, shut down, wait one minute,
and recheck oil level. If it still checks above full, drain oil to obtain
correct level.
Vehicles equipped with deep water fording kit will have a sealed
dipstick.
b.
Pull out dipstick (1) and check for proper oil level. Level should be at
crosshatch marks (2) between FULL and ADD 1 QT.
CAUTION
Do not overfill engine crankcase. Damage to engine may result.
c. If engine oil is low, remove oil filler cap (3) and add engine oil
(appendix G).
CAUTION
Use a non-vented filler cap only. An incorrect filler cap will not seal
properly, causing water to enter and damage engine.
d.
Replace oil filler cap (31, tighten securely, and wipe away any spilled oil.
e. Lower and secure hood (para. 3-9).