TM 9-2320-387-24-l
REFERENCE INFORMATION
INSTRUMENTS
CIRCUIT
Make
sure
these contacts are clean. Otherwise, the
wiper motor may not have power or ground.
Replace harness or repair wiring (para. 4-80).
Replace harness or repair wiring (para 4-90).
t
FRbNT OF VEHICLE
t
I
WINDSHIELD
CONNECTOR
AS VIEWED FROM ABOVE
RESISTANCE
AND CONTINUITY
04,500
OHMS
STE/lCE-R TEST 91
1. Connect RED dip and
BLACK
clip to the
indicated terminals in the question.
RED to the
first, BLACK to the second.
2. Start Test 91,0-4,500
Ohms.
3. Displayed reading is in ohms.
Less than
5 ohms is continuity.
If the resistance is over
4,500 ohms, STEXE-R
displays .9.9.9.9.
CONTINUITY
(RESISTANCE)
MULTIMETER
1. Bet the voltmeter
to an ohms scale of about
1.000 ohms.
2. Connect the RED and BLACK leads to the
connections
stated in the question.
3. Be sure to read the correct scale.
Less than
5 ohms indicates continuity.
For an open
cinxit.
the meter should peg full scale (needle
all the way to the left).
2-359