TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997
CHANGE 1

  TM-9-2320-387-24-1 - Page 419 of 1205

TM 9-2320-387-24-l
REFERENCE INFORMATION
INSTRUMENTS CIRCUIT
RESISTANCE
AND CONTINUITY
0-4,SOO OHMS
STOICE-R
TEST 91
1. Connect RED dip and BLACK clip to the
indicated terminals in the question.
RED to
the first, BLACK to the second.
2. Start Test 91,04,5W
Ohms.
3. Displayed
reading is in ohms.
Less than
5 ohms is continuity.
If the resistance is over
4.500 ohms, STEACE-R displays .9.9.9.9.
CONTINUITY
(RESISTANCE)
MULTIMETER
1. Set the voltmeter to an ohms scale of about
1,000 ohms.
2. Connect the RED and BLACK leads to the
connections
stated in the question.
3. Be sure to read the correct scale.
Less than
5 ohms indicates continuity.
For an open
circuit, the meter should peg full scale
(needle all the way to the left).
2-365


Back to Top