TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 631 of 1205

TM 9-2320-387-24-l

1 3-32. FUEL TANK HANGERS REPLACEMENT

This task covers:

a.

Removal

b.

Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

hlaterials/Parts

Equipment

Condition

Fuel tank removed (para. 3-25).

Maintenance

Level

Unit

Adhesive (Appendix C, Item 2)

Manual References

TM 9-2320-387-24P

1.

Remove two nuts (3), washers (4), capscrews (51, and rear hangers (7) from supports (6).

2.

%vist two front hangers (9) until tee handles (2) clear slots (11) in support (1) and remove front hangers (9).

3.

Inspect four insulators (8) on front and rear hangers (9) and (7). Remove insulators (81, if damaged.

11

1.

Install four insulators (8) on front and rear hangers (9) and (71, if removed.

2.

Install two front hangers (9) by inserting tee handles (2) up through slots (11) in support (1). Twist

hangers (9) so that tee handles (2) are resting across slots (11) and against side of ridge (10).

NOTE

Apply adhesive to threads of screws before installation.

3.

Install two rear hangers (7) on supports (6) with capscrews (51, washers (41, and nuts (3).

Tighten nuts (3) to 37 lb-ft (50 N-m).

FOLLOW-ON TASK: Install fuel tank (para. 3-25).

3-63