TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 633 of 1205

TM

9-2320-387-24-l

--

3-33. FUEL FILTER MAINTENANCE (Cont’d)

r7xizq

NOTE

The

bleeder tool used in steps 2,3, and 5 is optional. The tool

prevents fuel from spilling on engine.

1.

Install fuel pressure transducer (para. 4-30).

2.

Remove fuel filter bleeder screw (13) and install bleeder tool into hole.

3.

Place open end of bleeder tool hose in clean, clear container.

4.

Disconnect lead 54A (14) from solenoid (15).

CAUTION

Do not operate starter continuously for more than 20 seconds; wait

10 to 15 seconds between periods of operation. Failure to do this

may result in damage to the starter.

5.

Crank engine and watch fuel. When air bubbles stop coming through hose, remove bleeder tool, and

install bleeder screw (13). Tighten bleeder screw (13) to 40-50 lb-in. (4-6 Nom).

6.

Dispose of fuel in accordance with local SOI?

7.

Connect lead 54A (14) to fuel solenoid (15).

.

.

FOLLOW-ON TASKS:

l

Start engine (TM 9-2320-387-10) and check for fuel leaks.

l

Lower and secure hood (TM 9-2320-387-10).

l

Install engine access cover (para. 10-22).

3-65