TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 635 of 1205

TM

9-2320-387-24-l

3-34. FUEL FILTER ELEMENT MAINTENANCE (Cont’d)

c. Element

Installation

1.

Install filter element (12) into filter housing (6).

2.

Install separator (13) on filter element (121.

3.

Install O-ring seal (14) on filter housing (6).

4.

Install cover (3) on filter housing (6) with three washers (5) and capscrews (41. Tighten capscrews (4)

to SO-60 lb-in. (6-7 Nom).

5.

Install filter housing (6) in fuel filter bracket (10) with capscrew (9) and nut (11).

6.

Connect fuel filter drain hose (81 to filter housing (6) and tighten clamp (71 to lo-20 lb-in. (l-2 N*m).

7.

Connect fuel inlet hose (1) and fuel outlet hose (15) to fuel filter cover (3) and tighten clamps (2) to

lo-20 lb-in. (l-2 N-m).

/

I’

n

-

FOLLOW-ON TASK: Bleed fuel falter (para. 3-33).

3-67