TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 771 of 1205

TM

9-2320-387-24-l

4-22. HIGH-BEAM LAMP REPLACEMENT

This task covers:

a.

Removal

b.

Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Gasket (Appendix G, Item 56)

blanual

References

TM 9-2320-387-24P

Equipment

Condition

l

Electrical gauges removed (para. 4-16).

l

Speedometer/odometer removed (para. 4-17).

Maintenance

Level

Unit

NOTE

Prior to removal, tag leads for installation.

1.

Remove two light lenses (7) from instrument cluster back panel (4).

2.

Remove instrument cluster (6) from instrument cluster back panel (4).

3.

Disconnect harness lead 57L (2) and lead 17B (3) from high-beam lamp (5).

4.

Remove two screws (11, high-beam lamp (51, and gasket (8) from instrument cluster back panel (4).

b. Installation

1.

Install gasket (8) and high-beam lamp (5) on instrument cluster back panel (4) with two screws (1).

2.

Connect harness lead 57L (2) and lead 17B (3) to high-beam lamp (5).

3.

Install instrument cluster (6) on instrument cluster back panel (4).

4.

Install two light lenses (7) on instrument cluster back panel (4).

FOLLOW-ON TASKS:

l

Install speedometer/odometer (para. 4-17).

l

Install electrical gauges (para. 4-16).

4-45