TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 780 of 1205

TM

9-2320-387-24-l

_

4-30. FUEL PRESSURE TRANSDUCER REPLACEMENT

I

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

TOOIS

?&era1

mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materialflarts

Sealing compound (Appendix C, Item 61)

Manual References

TM 9-2320-387-10

Thl9-2320-387-24P

Equipment Condition

l

Battery ground cables disconnected (para. 468).

l

Hood raised and secured (TM 9-2320-387-10).

Maintenance Level

unit

NOTE

The

fuel pressure transducer is a sensor unit for diagnostic

testing. It is mounted on top of the fuel filter on firewall of vehicle.

71

1.

Disconnect multiple connector (2) from STE/ICE-R wiring harness (3).

2.

Remove fuel pressure transducer (1) from fuel filter (4).

[b.j

1.

Apply sealing compound to threads of fuel pressure transducer (1).

2.

Install fuel pressure transducer (1) on fuel filter (4).

3.

Connect multiple connector (2) to STE/ICE-R wiring harness (3).

FOLLOW-ON TASKS:

l

Connect battery ground cables (para. 4-68).

.

Start engine (TM 9-2320-387-10) and check fuel pressure transducer for leaks.

.

Lower and secure hood (TM 9-2320-387-10).

ii

4-54