TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 775 of 1205

TM 9-2320-387-24-l

I

4-26. HORN REPLACEMENT

I

This task covers:

a.

Removal

b.

Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two

lockwashers (Appendix G, Item 205)

Manual References

TM 9-2320-387-10

TM 9.2320-387.24P

Equipment

Condition

l

Battery ground cables disconnected (para. 4-68).

l

Hood raised and secured (TM 9-2320-387-10).

Maintenance

Level

Unit

NOTE

Prior to removal, tag leads for installation.

pTizEq

1.

Remove two capscrews (41, lockwashers (51, and horn (2) from bracket (3). Discard lockwashers (5).

2.

Disconnect leads 25A (1) and 26A (6) from horn (2).

-1

1.

Connect leads 25A (1) and 26A (6) to horn (21.

2.

Install horn

(2)

on bracket (31 with two lockwashers (5) and capscrews (4).

FOLLOW-ON

TASKS:

l

Connect battery ground cables (para. 4-68).

l

Lower and secure hood (TM 9-2320-387-10).

l

Check horn for proper operation (TM 9-2320-387-10).

4-49