TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 192 of 1555
10-95. DIVERTER MANIFOLD AND HOUSING REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Remove four screws (16) and panel assembly (15) from right mounting bracket (3) and A-beam (1).
2.
Remove four rivets (14) from manifold and housing (9) and duct (13).
3.
Remove two screws (8) from manifold and housing (9) and heater (7).
4.
Remove screw (6) from clip (5) and manifold and housing (9).
5.
Remove pushnut (11) and disconnect defroster cable core (12) from baffle pin (10). Discard pushnut (11).
6.
Pull manifold and housing (9) away from A-beam (1) and loosen two clamps (4) securing defroster
flex ducts (2) to manifold and housing (9).
7.
Remove manifold and housing (9) from heater (7).
INITIAL SETUP:
Applicable Models
M1113
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Pushnut (Appendix G, Item 313)
Four rivets (Appendix G, Item 347.3)
Manual References
TM 9-2320-387-24P
TM 9-2320-387-24-2
Change 1
10-159
1
4
9
14
11
16
12
13
15
10
2
3
5
8
7
6
4
~
Back to Top
