TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 219 of 1555
11-12. DOOR LATCH CATCH REPLACEMENT
This task covers:
a. Removal
b.
Installation
NOTE
Replacement procedures for door latch catches are basically the
same. This procedure covers the right door latch catch.
Remove two capscrews (3), door latch catch (2), and spacer (1) from body (4).
Apply sealing compound to threads of two capscrews (3), and install spacer (1) and door latch catch (2)
on body (4) with capscrews (3). Tighten capscrews (3) to 75 lb-in. (8 N
•
m).
b. Installation
a. Removal
INITIAL SETUP:
Applicable Models
M1114
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound (Appendix C, Item 72.1)
Manual References
TM 9-2320-387-24P
Maintenance Level
Unit
TM 9-2320-387-24-2
11-24
Change 1
3
1
2
~
4
Back to Top
