TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 39 of 1555
10-14. CENTER HOOD STOP GUIDE REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
Remove six locknuts (5), washers (2), capscrews (1), washers (2), two guide plates (3), and guide
brackets (4) from hood (6). Discard locknuts (5).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Six locknuts (Appendix G, Item 109)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Hood raised and secured (TM 9-2320-387-10).
Maintenance Level
Unit
b. Installation
Install two guide plates (3) and guide brackets (4) on hood (6) with six washers (2), capscrews (1), wash-
ers (2), and locknuts (5). Tighten locknuts (5) to 10 lb-ft (14 N
•
m).
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10).
TM 9-2320-387-24-2
Change 1
10-23
1
2
3
3
4
2
5
6
Back to Top
