TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 29 of 1555
TM 9-2320-387-24-2
10-14
Change 1
10-9. HOOD AND HINGE MAINTENANCE
.
WARNING
.
Hood must be supported during removal and installation. Failure
to support hood may cause injury to personnel or damage to
equipment.
1.
Disconnect left and right hood harness connectors (1) from harness connectors (2).
a. Removal
This task covers:
a. Removal
c.
Alignment
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Three cotter pins (Appendix G, Item 30)
Eight locknuts (Appendix G, Item 109)
Antiseize compound (Appendix C, Item 17)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
TM 43-0139
Equipment Condition
Hood raised and secured (TM 9-2320-387-10).
General Safety Instructions
Hood must be supported during removal and
installation.
Maintenance Level
Unit
1
2
Back to Top
