TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 23 of 1555
TM 9-2320-387-24-2
10-8
Change 1
10-5. HOOD LATCH MAINTENANCE (Cont’d)
Install hood latch (11) on latch (10) with two rollers (9), pin (8), and cotter pin (1).
NOTE
• If only rubber latch is to be replaced, spring pin may not be
completely out of base.
• M1114 vehicles are equipped with plusnuts/tapping blocks
instead of nuts and washers. Apply sealing compound to
threads of capscrews for M1114 vehicles only.
1.
Install latch (10) on base (7) with spring pin (2).
2.
Install base (7) on body (5) with two washers (4), capscrews (3), washers (4), and locknuts (6).
Tighten capscrews (3) to 6 lb-ft (8 N
•
m).
d. Installation
c. Assembly
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10).
1
2
3
4
5
4
6
7
8
9
10
11
9
Back to Top
