TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 18 of 1555
10-2. FUEL FILLER HOUSING MAINTENANCE
This task covers:
a. Removal
c.
Installation
b. Inspection
a. Removal
TM 9-2320-387-24-2
Change 1
10-3
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound
(Appendix C, Item 72.1)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Fuel door open (M1114 only) (TM 9-2320-387-10).
Maintenance Level
Unit
4
3
5
2
1
6
4
7
~
8
9
10
11
M1114
1.
Turn filler cap T-handle (1) and remove filler cap (2) from filler spout (6).
NOTE
M1114 vehicles are equipped with plusnuts instead of nuts and
washers.
2.
Remove three nuts (7), washers (4), capscrews (3), and washers (4) from filler housing (5) and filler
spout (6).
3.
Remove six screws (11) and washers (10) from fuel filler housing (5) and right outer wheelhouse
panel (8).
4.
Push filler cap (2) through filler housing (5) and remove filler housing (5).
5.
Inspect six speednuts (9) for presence or damage. Replace if defective or missing.
Back to Top
