TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 19 of 1555
10-2. FUEL FILLER HOUSING MAINTENANCE (Cont’d)
Refer to para. 10-56 for plusnut (11) inspection and replacement.
1.
Pull filler cap (2) through filler housing (5) on right outer wheelhouse panel (8).
2.
Install filler housing (5) on right outer wheelhouse panel (8) with six washers (9) and screws (10).
Tighten screws (10) to 20 lb-in. (2 N
•
m).
NOTE
M1114 vehicles are equipped with plusnuts instead of nuts and
washers. Apply sealing compound on threads for M1114
vehicles only.
3.
Install filler housing (5) on filler spout (6) with three washers (4), capscrews (3), washers (4), and nuts (7).
For M1114 only, tighten capscrews (3) to 75 lb-in. (9 N
•
m).
4.
Install filler cap (2) on filler spout (6) with T-handle (1).
c. Installation
b. Inspection
TM 9-2320-387-24-2
10-4
Change 1
FOLLOW-ON TASK: Close fuel door (M1114 only) (TM 9-2320-387-10).
M1114
4
3
5
2
1
6
4
7
9
10
11
~
8
Back to Top
