TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 34 of 1555
10-9.1. JACK RETAINING STRAP REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Slide driver’s seat (1) forward.
2.
Remove four locknuts (7), washers (6), screws (4), two footman loops (2), and jack retaining strap (3)
from vehicle floor (5). Discard locknuts (7).
b. Installation
TM 9-2320-387-24-2
1.
Install jack retaining strap (3) and two footman loops (2) on vehicle floor (5) with four screws (4),
washers (6), and locknuts (7).
2.
Slide driver’s seat (1) backward.
Change 1
10-18.1/(10-18.2 blank)
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Four locknuts (Appendix G, Item 152.1)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-24P
Equipment Condition
Left front underbody armor removed (M1114 only)
(para. 11-36.1)
Maintenance Level
Unit
FOLLOW-ON TASK: Install left front underbody armor (para 11-36.1).
Back to Top
