TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 438 of 1555

TM 9-2320-387-24-2

12-29. WINCH VENT LINE REPLACEMENT

This task covers:

a.

Removal

INITIAL SETUP:

b. Installation

Applicable

Models

Ml113

Manual References

TM

9-2320-387-10

TM 9-2320-387-24P

Tools

General

mechanic’s

tool kit:

Equipment

Condition

automotive (Appendix B, Item 1)

Hood raised

and secured

(TM 9-2320-387-10).

MaterialsParts

Maintenance

Level

Three tiedown

straps (Appendix

G,

Item 463)

unit

1.

Disconnect vent line (5) from winch fitting (3).

2.

Remove three tiedown straps (1) from vent line (5) and cables (4). Discard tiedown straps (1).

3.

Disconnect vent line (5) from tee fitting (2) and remove vent line 6).

1.

Connect vent line (5) to tee fitting (2) and winch fitting (3).

Install vent

1

line (5) on cables (4) with three tiedown straps (1).

,,

FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-387-10).

12-58