TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 446 of 1555
TM 9-2320-387-24-2
12-60.6
Change 1
12-31.1. 10,500 LB WINCH HYDRAULIC HOSE REPLACEMENT (Cont'd)
8.
Connect hydraulic hose (9) to elbow (7) at top inlet port on winch (5).
9.
Connect hydraulic hose (8) to elbow (6) at bottom outlet port on winch (5).
10.
Install hydraulic hose assemblies (8) and (9) on winch and bumper assembly (12) with two
clamps (4), capscrew (13), washer (2), and locknut (3).
11.
Secure lead wire (10) and controller plug (11) to hydraulic hose assemblies (8) and (9) with three
tiedown straps (1).
FOLLOW-ON TASKS: • Connect battery ground cables (para. 4-68).
• Bleed power steering system (para. 8-27).
• Install engine left splash shield (para. 10-23).
1
2
3
4
5
6
7
8
9
10
11
1
12
13
~
Back to Top
