TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 453 of 1555
12-32.1. 10,500 LB HYDRAULIC WINCH CONTROLLER PLUG REPLACEMENT (Cont'd)
TM 9-2320-387-24-2
Change 1
12-62.5
CAUTION
Ensure controller plug harness does not contact any moving
parts.
1.
Route controller plug harness (1) through hole in body panel (3) into engine compartment (6).
2.
Route controller plug harness (1) around fuel filter (2) and along body wiring harness (7) and lead
wire (5) to frame rail (4) and then down to winch valve assembly (8).
b. Installation
6
5
1
3
7
4
2
4
8
~
~
~
Back to Top
