TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 462 of 1555

TM

9-2320-387-24-2

I

12-36.

REAR WINCH

CLUTCH CABLE REPLACEMENT

1

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Applicable Models

Ml114

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-387-24P

Maintenance

Level

Unit

hlaterialearts

Locknut (Appendix G, Item 160)

1

a. Removal

]

1.

Remove locknut (61, washer (7), rod end (81, two washers (91, and capscrew (11) from

lever (10).

Discard locknut (6).

2.

Loosen nut (5) and remove rod end (8) and nut (5) from cable (4).

3.

Loosen nut (2) and remove handle (1) and nut (2) from cable (4).

4.

Remove two clips (3) and cable (4) from bracket (12).

b. Installation

1.

Install cable (4) on bracket (12) with two clips (3).

2.

Install nut (2) and handle (1) on cable (4). Tighten nut (2).

3.

Install nut (5) and rod end 03) on cable (4) and adjust rod end (8) and nut (5) as required to allow full

clutch operation.

4.

Tighten nut (5).

5.

Install

capscrew

(111, two

washers (9),

and rod end (8) on lever (10) with washer (7) and locknut (6).

12-68