TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 461 of 1555

TM 9-2320-387-24-2

12-35.

REAR FAIRLEAD ROLLER BRACKET ASSEMBLY REPLACEMENT

This task covers:

a.

Removal

INITIAL SETUP:

b.

Installation

Applicable

Models

Ml114

Tools

General mechanic’s tool kit:

automotive

(Appendix B, Item 1)

Materials/Parts

Two locknuts

(Appendix

G,

Item 130)

Manual References

TM 9-2320-387-24P

General Safety Instructions

Wear leather gloves when handling winch cable,

Maintenance

Level

Unit

WARNING

Gloves must be worn when handling winch cable. Failure to

do so may cause severe injury to personnel.

I

a. Removal

I

1.

Remove four retaining rings (61, two shafts (51, and rollers (4) from bracket (10).

2.

Remove four retaining rings (71, two shafts (91, and rollers (8) from bracket (10).

3.

Remove two locknuts (111, washers (21, capscrews Cl), washers (2), and bracket (10) from frame (3).

Discard locknuts (11).

rYzzzz-1

1.

2.

Install two rollers (8) and shafts (9) on bracket (10) with four retaining rings (7).

3.

Install two rollers (4) and shafts (5) on bracket (10) with four retaining rings (6).

Install bracket (10) on frame (3) with two washers (21, capscrews (11, washers (21,

Tighten locknuts (11) to 35 lb-ft (47 N-m).

and locknuts (111,

12-67