TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 457 of 1555
TM 9-2320-387-24-2
12-33. REAR WINCH REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Manual References
Ml114
TM 9-2320-387-24P
Tools
General
mechanic’s tool kit:
Equipment Condition
Battery ground cables disconnected (para.
4-68).
General Safety Instructions
Winch must be supported during removal and
installation.
Maintenance Level
unit
automotive (Appendix B, Item 1)
Materials/Parts
RTV sealant (Appendix C, Item 74)
Locknut (Appendix
G,
Item 162)
Personnel Required
One mechanic
One assistant
WARNING
Winch must be supported during removal and installation. Failure
to support winch may result in injury to personnel or damage to
equipment.
1
a.
Removal
1
1.
Remove nut (3) and power lead (2) from solenoid pack power stud (1).
2.
Remove four nuts EQ, capscrews (6), cover (7), and control receptacle (4) from bracket (5).
12-63
Back to Top
