TM-9-2320-387-24-2

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-2 - Page 780 of 1555

TM9-2320-387-24-2

21-6. GEARED HUB REPAIR (Cont’d)

NOTE

Immediately install steering arm cover after application of sealer.

17.

18.

19.

20.

Apply sealing compound to seal (17) and install seal (17) on steering arm cover (16) with retaining

ring (18).

Install steering arm

cover

(16) on geared hub (7) with four washers (15) and capscrews (141. Tighten

capscrews (14) to 65 lb-ft (88 N-ml.

Apply anaerobic sealer to side cover (22) mating surface and position side cover

(22)

on geared

hub (7).

Apply sealing compound to capscrews (20) and install side cover (22) on geared hub (7) with eight

washers (21) and capscrews (201. Tighten capscrews (20) to 8-13 lb-ft (11-18 Neml.

0

16

FOLLOW-ON TASKS: Install geared hub (para. 6-9).

21-17