TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 781 of 1555
TM 9-2320-387-24-2
21-7.
CONTROL ARM BUSHING REPLACEMENT
This task covers:
a. Removal
b.
Installation
INITIAL SETUP:
Tools
General
mechanic’s
tool kit:
automotive
(Appendix
B, Item 1)
Materials/Parts
Grease (Appendix
C, Item 34)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-24P,
Equipment Condition
Control arm removed (para. 6-25 or 6-26).
Maintenance Level
Direct support
NOTE
Control arm bushings
must be replaced
as a set.
[
a.
Removal
1
Support
control arm (1) and press bushing
(21 out of control arm (1).
b. Installation
1.
2.
3.
Lubricate
O.D. of bushing (2) with grease.
Insert bushing
(2) in control arm (1).
Support
control arm (1) and press bushing
(2) into control arm (1) until flange (3) on bushing
(2)
seats on control arm (1).
FOLLOW-ON
TASK: Install control arm (para. 6-25 or 6-26).
21-18
Back to Top
