TM-9-2320-428-10
TRUCK, CARGO, 8X8, M977
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-428-10 - Page 260 of 1072
PREPARE CRANE FOR USE - Continued
WARNING
If operator cannot see load during operation, operate crane from
REMOTE CONTROL UNIT. Failure to comply may result in injury or
death to personnel.
NOTE
•
Failure of hydraulic system will stop crane operation and lock crane
in place. If hydraulic system fails during crane operation, refer to
perform immediate action for loss of hydraulic system. (WP 0104)
•
If electrical system fails during crane operation, refer to perform
emergency hydraulic operation when grove crane electrical power
fails. (WP 0105)
•
Grove crane can operate on up to 5-degree side slope.
2.
Start engine. (WP 0044)
3.
Position vehicle on level ground so all loading and unloading can be done from one
position.
4.
Set transmission range selector (1) to N (neutral).
5.
Pull out PARKING BRAKE control (2).
TM 9-2320-428-10
0042
0042-2
Back to Top
