TM-9-2320-428-10

TRUCK, CARGO, 8X8, M977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-428-10 - Page 267 of 1072

SETUP OUTRIGGERS - Continued

Figure 8.

5.

Position outrigger pad (4) directly below outrigger jack cylinder (8).

6.

Repeat Steps (2) through (5) to set up driver side outrigger pad.

WARNING

Keep hands and feet clear of outrigger jack cylinders. Failure to comply

may result in injury or death to personnel.

NOTE

Adjust outrigger pad position as required so rod end will lower into pad

socket.

7.

Move left-hand outrigger jack (LH O/R JACK) control lever (9) to DOWN position and

lower outrigger jack cylinder (8) until rod end is seated in outrigger pad (4).

TM 9-2320-428-10

0042

0042-9