TM-9-2320-428-10

TRUCK, CARGO, 8X8, M977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-428-10 - Page 473 of 1072

OPERATOR MAINTENANCE

SNATCH BLOCK INSTALLATION/REMOVAL

INITIAL SETUP:

Not Applicable

ATTACH SNATCH BLOCK TO SELF-RECOVERY WINCH CABLE

1.

Remove snatch block (1) from stowage.

Figure 1.

2.

Remove screw (2).

3.

Move plate (3) to side to open snatch block (1).

4.

Place winch cable (4) in snatch block (1).

5.

Close plate (3) and align holes.

6.

Install screw (2).

7.

Ensure screw (2) is tight and winch cable (4) can be moved freely through snatch

block (1).

8.

Continue with self-recovery operation (WP 0086).

TM 9-2320-428-10

0087

0087-1