DISCONNECT CABLE FROM VEHICLE - Continued
1
3
4
2
6
5
8
9
7
Figure 3.
2.
Remove cotter pin (2).
3.
Remove pin (3) and disconnect clevis (4) from tie down ring (5).
4.
Remove cotter pin (6).
5.
Remove pin (7) and disconnect lifting shackle (8) from tow eye (9).
6.
Remove tie down ring (5) from lifting shackle (8).
7.
Stow lifting shackle (8).
NOTE
There are three tie down rings on each side of vehicle.
8.
Install tie down ring (5) into mounting plate (10).
TM 9-2320-428-10
0088
0088-3