TM-9-2320-428-10
TRUCK, CARGO, 8X8, M977
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-428-10 - Page 474 of 1072
REMOVE SNATCH BLOCK FROM SELF-RECOVERY WINCH CABLE
1.
Check that there is enough slack in winch cable (1).
Figure 2.
2.
Remove screw (2).
3.
Move plate (3) to side to open snatch block (4).
4.
Take winch cable (1) out of snatch block (4).
5.
Close plate (3) and align holes.
6.
Install screw (2).
7.
Stow snatch block (4) in stowage box.
8.
Continue with self-recovery operation (WP 0086).
END OF TASK
END OF WORK PACKAGE
TM 9-2320-428-10
0087
0087-2
Back to Top
