TM-9-2320-428-10

TRUCK, CARGO, 8X8, M977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-428-10 - Page 475 of 1072

OPERATOR MAINTENANCE

CONNECT/DISCONNECT SELF-RECOVERY WINCH CABLE TO ANOTHER VEHICLE

INITIAL SETUP:

Not Applicable

CONNECT CABLE TO VEHICLE

CAUTION

When attaching self-recovery winch cable to another vehicle, that vehicle

must be used only as an anchor point or damage to equipment can result.

NOTE

There are three tie down rings on each side of vehicle.

1.

Unscrew one tie down ring (1) from mounting plate (2).

Figure 1.

2.

Remove lifting shackle (3) from stowage.

TM 9-2320-428-10

0088

0088-1