TM-9-2320-431-10-1

TRUCK, WRECKER, 8X8, M984A1

TECHNICAL MANUAL; OPERATOR'S MANUAL; PART 1 OF 2

JUNE 2009

TM-9-2320-431-10-1 - Page 1042 of 1244

STOW OUTRIGGERS - Continued

1

5

1

2

2

6

7

7

6

3

3

4

Figure 24.

NOTE

Operate left and right outrigger jack (LH O/R JACK and RH O/R JACK)

control levers at the time until both outrigger jack cylinders are out of pads.

2.

Move left outrigger jack (LH O/R JACK) and right outrigger jack (RH O/R JACK) control

levers (3 and 4) to UP position to retract outrigger jack cylinder (5) completely.

3.

Install two retaining pins (1) into each outrigger pad (2).

4.

Stow each outrigger pad (2) on appropriate stud (6).

5.

Install safety pins (7) through each stud (6).

WARNING

Stand clear of outrigger beams while operating lever. Failure to comply

may result in injury or death to personnel.

TM 9-2320-431-10-1

0106

0106-26