TM-9-2320-434-10
TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-434-10 - Page 557 of 1324
OPERATOR MAINTENANCE
NORMAL TRANSFER OF FLATRACK FROM VEHICLE TO TRAILER
INITIAL SETUP:
Not Applicable
OPERATION
WARNING
Prior to and during any load or unload cycle, all personnel should stay
clear of LHS, flatrack, front lift adapter, and container. Failure to comply
may result in injury or death to personnel.
WARNING
Trailer wheels must be chocked during transfer operations. Failure to
comply may result in injury or death to personnel.
CAUTION
•
Ensure that trailer drawbar is down against the ground during transfer
operations, or damage to equipment may result.
•
Ensure air lines and cables are properly stowed to prevent damage
to equipment (refer to TM 9-2330-385-14).
•
Both trailer bumper points must be under the vehicle bumper stop
flange and at least one of the bumper points must contact the bumper
stop. The trailer bumper point not contacting the vehicle bumper stop
cannot exceed 0.5 in. (12.7 mm) or flatrack will miss main rail guides
and equipment damage may result.
TM 9-2320-434-10
0066
0066-1
Back to Top
