TM-9-2320-434-10
TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-434-10 - Page 561 of 1324
OPERATION - Continued
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or
damage to equipment may result.
6.
Turn hydraulic selector switch (9) to AUTO.
WARNING
When loading or unloading flatracks/FRS on uneven ground (side slope
or downgrades up to 5 degrees), it may be necessary to apply vehicle
service brakes to prevent vehicle rollaway. Failure to comply may result
in injury or death to personnel.
WARNING
Check for overhead power lines or other obstructions prior to attempting
LHS operation. LHS reaches a height of 22 ft. 2 in. (6.7 m). Failure to
comply may result in injury or death to personnel.
WARNING
Trailer wheels must be chocked during transfer operations. Failure to
comply may result in injury or death to personnel.
CAUTION
•
Load must be evenly distributed on flatrack. Uneven load distribution
may cause LHS OVER LOAD indicator to give false signals and
cause LHS to operate incorrectly.
TM 9-2320-434-10
0066
0066-5
Back to Top
