TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 570 of 1324

OPERATION - Continued

NOTE

LHS will only operate when transmission range selector is in N (neutral).

36.

Set transmission range selector (4) to N (neutral).

WARNING

Never drive with LHS NO TRANSIT indicator illuminated. An illuminated

indicator means LHS is not fully stowed. Failure to comply may result in

injury or death to personnel.

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or

damage to equipment may result.

NOTE

LHS hook arm does not need to be fully stowed if more transfer operations

are going to be made.

37.

Turn hydraulic selector switch (9) to AUTO.

38.

Move joystick (10) to LOAD position and retract LHS until LHS NO TRANSIT indicator

(21) goes out.

39.

Turn hydraulic selector switch (9) to OFF.

40.

Set PTO ENGAGE switch (7) to OFF position. Indicator light (8) will go out.

END OF TASK

END OF WORK PACKAGE

TM 9-2320-434-10

0066

0066-14