TM-9-2320-434-10
TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-434-10 - Page 581 of 1324
OPERATOR MAINTENANCE
TRANSFER FLATRACK FROM VEHICLE TO TRAILER IN MANUAL MODE
INITIAL SETUP:
Not Applicable
OPERATION
WARNING
Trailer wheels must be chocked during transfer operations. Failure to
comply may result in injury or death to personnel.
CAUTION
•
Ensure that trailer drawbar is down against the ground during transfer
operations, or damage to equipment may result.
•
Ensure all air lines and cables are properly stowed to prevent damage
to equipment.
•
Both of the trailer bumper points must be under the vehicle bumper
stop flange and at least one of the bumper points must contact the
bumper stop. The trailer bumper point not contacting the vehicle
bumper stop cannot exceed 0.5 in. (12.7 mm) or flatrack will miss
main rail guides and equipment damage may result.
1.
Back up the vehicle so that trailer bumper (1) is under flange and contacts vehicle
bumper stop (2).
TM 9-2320-434-10
0068
0068-1
Back to Top
