TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1068 of 1616

TM 9-2320-440-13&P

0146-2

0146

REMOVAL

NOTE

•

Height control link is disconnected from height control valve on same side of vehicle as

ball valve being replaced.

•

Both ball valves are removed the same way. No. 4 Axle, right side shown.

•

Note position of washers prior to removal to ensure proper installation.

1.

Remove locknut (1), washer (2), washer (3), screw (4), and height control link (5) from height control valve (6).

Discard locknut.

2.

Push down control arm of height control valve (6) to drain air pressure from suspension air spring (7).

NOTE

•

Tag and mark air lines prior to removal to ensure proper installation.

•

Cap and plug air lines upon removal.

3.

Remove air line 2102A (8) from elbow (9).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

THAAD0308

THAAD0309