TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1069 of 1616

TM 9-2320-440-13&P

0146-3

0146

NOTE

Note position of ball valve prior to removal to ensure proper installation.

4.

Remove ball valve (10) from fitting (11).

5.

Remove fitting (11) from tee (12).

NOTE

Note position of elbow prior to removal to ensure proper installation.

6.

Remove elbow (9) from ball valve (10).

END OF TASK

INSTALLATION

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing. To avoid injury or death, keep away

from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

NOTE

•

Both ball valves are installed the same way.

No. 4 axle, right side shown.

•

Install elbow as noted prior to removal.

1.

Apply pipe thread sealing compound to threads of elbow (9) and install elbow (9) on ball valve (10).

2.

Apply pipe thread sealing compound to threads of fitting (11) and install fitting (11) on tee (12).

NOTE

Install ball valve as noted prior to removal.

3.

Install ball valve (10) on fitting (11).