TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1082 of 1616

TM 9-2320-440-13&P

0149-2

0149

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

CAUTION

Vehicle must be unloaded prior to removing equalizing beam.

Failure to comply

may cause damage to equipment.

NOTE

•

All equalizing beams are removed the same way. No. 4 axle, left side shown.

•

Axle should be level when supported with jackstand.

1.

Support wheel hub (1) with jackstand (2).

2.

Remove locknut (3), screw (4), and shock absorber (5) from lower shock absorber mounting bracket (6).

Discard locknut.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

WARNING

Equalizing beam is heavy (Aprox. 145 lbs). Do not lift equalizing beam without the aid of Soldier B.

Failure to comply may result in injury to personnel.

THAAD0392