TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1089 of 1616

TM 9-2320-440-13&P

0151-3

0151

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

5.

Remove three fittings (11, 12, and 13) from height control valve (6).

END OF TASK

INSTALLATION

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in a well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

NOTE

Both height control valves are installed the same way.

Right side shown.

1.

Apply pipe thread sealing compound to threads of three fittings (11, 12, and 13) and install fittings (11, 12, and

13) on height control valve (6).

2.

Soldier A and Soldier B install height control valve (6) and bracket (18) on frame rail (19) with two spacers

(17), cushion clip (16), screws (15) and locknuts (14).

3.

Install three air lines 2945 (8), 2102A (9), and 2106 (10) on three fittings (11, 12, and 13).

THAAD0410