TM 9-2320-440-13&P
0028-3
0028
HOOK ARM DOES NOT UNLOAD IN MANUAL MODE (CONTINUED)
THAAD0656B
CAUTION
Engine speed must be at idle before using hydraulic select switch.
Failure to
comply may result in damage to equipment.
Step 3.
Connect THAAD control valve hook arm down harness connector HV2-B1. Start
engine(
Turn PTO switch to ON position (WP 0011). Press hook
arm up control valve override button. Check if hook arm unloads. Shut off
engine (
If hook arm unloads, replace main frame directional control valve (WP 0125).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TM 9-2320-347-10)
TM 9-2320-347-10)