TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 249 of 1616

TM 9-2320-440-13&P

0027-3

0027

HOOK ARM DOES NOT LOAD IN MANUAL MODE (CONTINUED)

THAAD0642A

CAUTION

Engine speed must be at idle before using hydraulic select switch.

Failure to

comply may result in damage to equipment.

Step 3.

Connect THAAD control valve hook arm down harness connector HV2-A1.

Start

engine (

Check if hook arm loads while depressing and holding

hook arm down directional control valve override button (

Note

hook arm operation.

Shut off engine (

If hook arm loads, replace main frame directional control valve (WP 0125).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)

TM 9-2320-347-10)

TM 9-2320-347-10)