TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 246 of 1616

TM 9-2320-440-13&P

0026-8

0026

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

END OF WORK PACKAGE

WORK LIGHT(S) DO NOT OPERATE (CONTINUED)

THAAD0048

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shocks to personnel.

Step 15.

Disconnect chassis harness connector MC1. Turn work lights ON (WP 0005). Check for

22 to 28 vdc between wire 1040 at cab harness connector MC1, terminal U and a

known good ground.

a.

If 22 to 28 vdc are present, repair chassis harness wire 1040

(TM 9-2320-325-14&P) or notify Supervisor.

b.

If 22 to 28 vdc are not present, repair cab harness wire 1040

(TM 9-2320-325-14&P) or notify Supervisor.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION