TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 245 of 1616

TM 9-2320-440-13&P

0026-7

0026

WORK LIGHT(S) DO NOT OPERATE (CONTINUED)

THAAD0047

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shocks to personnel.

Step 13.

Remove top heater compartment cover (TM 9-2320-325-14&P). Turn engine switch ON

(engine OFF) (

Check for 22 to 28 vdc between wire 1040A at work

light switch bottom terminal and a known good ground.

If 22 to 28 vdc are not present, repair wire 1040A (TM 9-2320-325-14&P) or

notify Supervisor.

Step 14.

Turn work light switch ON (WP 0005). Check for 22 to 28 vdc between work light

switch, terminal wire 1040 (top terminal), and a known good ground.

If 22 to 28 vdc are not present, replace work light switch

(TM 9-2320-325-14&P).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)