TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 236 of 1616

TM 9-2320-440-13&P

0025-20

0025

RACK LOCKS ENGAGED INDICATOR LIGHT(S) DO NOT OPERATE PROPERLY (CONTINUED)

THAAD0435

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 30.

Disconnect one of the THAAD compression frame harness MRP rack lock proximity

switch connectors.

Turn engine start switch ON (

Check for 22 to

28 vdc between wire 1461 at disconnected THAAD compression frame harness MRP

rack lock engaged proximity switch connector, terminal A and a known good ground.

If 22 to 28 vdc are not present, go to Step 33.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)