TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 234 of 1616

TM 9-2320-440-13&P

0025-18

0025

RACK LOCKS ENGAGED INDICATOR LIGHT(S) DO NOT OPERATE PROPERLY (CONTINUED)

THAAD0434

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 26.

Disconnect THAAD compression frame harness right MRP rack lock engaged proximity

switch connector. Check for continuity across wire 1978 from right MRP rack lock

engaged proximity switch connector, terminal B to THAAD control valve harness VIM

No. 1, 40 pin connector, terminal 35.

If there is continuity, go to Step 28.

Step 27.

Disconnect THAAD control valve harness THAAD compression frame harness

connector. Check for continuity across THAAD control valve harness wire 1978 from

THAAD compression frame harness connector, terminal B to VIM No. 1, 40 pin

connector, terminal 35.

a.

If there is continuity, repair wire 1978 (TM 9-2320-325-14&P) or replace

THAAD control valve harness (WP 0088).

b.

If there is no continuity, repair wire 1978 (TM 9-2320-325-14&P) or

replace THAAD compression frame harness (WP 0087).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION