TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 225 of 1616

TM 9-2320-440-13&P

0025-9

0025

RACK LOCKS ENGAGED INDICATOR LIGHT(S) DO NOT OPERATE PROPERLY (CONTINUED)

THAAD0425

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

Step 10.

Turn engine start switch ON (

Check if LHS cab control MRP

LOADED and MRP control station RACK LOCKS ENGAGED indicator lights illuminate.

a.

If only one of the indicator lights illuminates, replace VIM No. 1

(WP 0089).

b.

If LHS cab control MRP LOADED and MRP control station RACK

LOCKS ENGAGED indicator lights flash or do not illuminate, go to Step

15.

NOTE

MRP control station RACK LOCKS ENGAGED indicator light will not illuminate in blackout

mode.

Step 11.

Turn blackout lights on (

Check if MRP control station RACK

LOCKS ENGAGED blackout indicator light illuminates.

If RACK LOCKS ENGAGED blackout indicator light illuminates, problem is

corrected.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

TM 9-2320-347-10)

TM 9-2320-347-10)