TM 9-2320-440-13&P
0024-13
0024
NO HIGH IDLE DURING MRP ELEVATION OPERATION OVER 5 DEGREES (CONTINUED)
THAAD0545
WARNING
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment or
severe burns or electrical shock to personnel.
Step 16.
Disconnect THAAD control valve harness twelve terminal connector. Check for
continuity across wire 1516 from VIM No. 2, 24 pin connector, terminal 6 to twelve
terminal connector, terminal 10.
If there is no continuity, repair THAAD control valve harness wire 1516
(TM 9-2320-325-14&P) or replace THAAD control valve harness (WP 0088).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION