TM 9-2320-440-13&P
0024-10
0024
NO HIGH IDLE DURING MRP ELEVATION OPERATION OVER 5 DEGREES (CONTINUED)
THAAD0543
WARNING
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment or
severe burns or electrical shock to personnel.
Step 13.
Disconnect THAAD control valve harness VIM No. 2, 24 pin connector (WP 0089).
Check for continuity across wire 1516 from THAAD control valve harness VIM No. 2, 24
pin connector, terminal 6 to ECU vehicle/selector harness connector MC66, terminal 1.
If there is no continuity, go to Step 16.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION